Cisco Catalyst 3750-X Command Reference

2-3
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
aaa authentication dot1x
aaa authentication dot1x
Use the aaa authentication dot1x global configuration command on the switch stack or on a standalone
switch to specify the authentication, authorization, and accounting (AAA) method to use on ports
complying with the IEEE 802.1x authentication. Use the no form of this command to disable
authentication.
aaa authentication dot1x {default} method1
no aaa authentication dot1x {default}
Syntax Description
Note Though other keywords are visible in the command-line help strings, only the default and group radius
keywords are supported.
Defaults No authentication is performed.
Command Modes Global configuration
Command History
Usage Guidelines The method argument identifies the method that the authentication algorithm tries in the given sequence
to validate the password provided by the client. The only method that is truly IEEE 802.1x-compliant is
the group radius method, in which the client data is validated against a RADIUS authentication server.
If you specify group radius, you must configure the RADIUS server by entering the radius-server host
global configuration command.
Use the show running-config privileged EXEC command to display the configured lists of
authentication methods.
default Use the listed authentication method that follows this argument as the default
method when a user logs in.
method1 Enter the group radius keywords to use the list of all RADIUS servers for
authentication.
Release Modification
12.2(53)SE2 This command was introduced.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English