Cisco Catalyst 3750-X Command Reference

2-260
Catalyst 3750-X and 3560-X Switch Command Reference
OL-29704-01
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
ip device tracking
ip device tracking
To enable IP device tracking, use the ip device tracking global configuration command. Use the no form
of this command to disable this feature.
ip device tracking
no ip device tracking
Syntax Description This command has no arguments or keywords.
Command Default IP device tracking is disabled.
Command Modes Global configuration
Command History
Usage Guidelines When IP device tracking is enabled, you can set the IP device tracking probe interval, count, and
configure the ARP probe address with the ip device tracking probe command.
Use the show ip device tracking all command to display information about entries in the IP device
tracking table. For more information about this command, see the Cisco IOS Security Command
Reference, Release 12.4T.
Examples This example shows how to enable device tracking:
Switch(config)# ip device tracking
Switch(config)#
Related Commands
12.2(53)SE2 This command was introduced.
Command Description
ip device tracking probe Configures the IP device tracking table for ARP probes.
show ip device tracking all Displays information about the entries in the IP device tracking
table.

Cisco Catalyst 3750-X Specifications

General

Brand	Cisco
Model	Catalyst 3750-X
Category	Switch
Language	English