KTM 300 EXC TPI 2019 Repair Manual

EXHAUST 10
113
R02818-10
– Route the cable without tension and secure it with a cable
tie.
R02822-10
(All XC‑W models)
–
Position the manifold and mount springs
1
.
Spring hook (5030501700004) ( p. 371)
R02824-11
–
Mount and tighten screw
2
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Tighten screw
3
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
R02909-11
–
Mount and tighten screw
4
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
–
Tighten screw
5
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
10.3 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm