EasyManuals Logo

KTM 300 EXC TPI 2019 Repair Manual

KTM 300 EXC TPI 2019
387 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #181 background imageLoading...
Page #181 background image
BRAKE SYSTEM 16
179
Note
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
Check the brake linings of the rear brake. ( p. 174)
E00348-10
Main work
Stand the vehicle upright.
Remove screw cap
1
with membrane
2
and the O-ring.
Add brake fluid to level
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 358)
Mount and tighten the screw cap with the membrane and O-
ring.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
16.15 Changing the rear brake fluid
Warning
Skin irritationBrake fluid causes skin irritation.
Keep brake fluid out of the reach of children.
Wear suitable protective clothing and safety glasses.
Do not allow brake fluid to come into contact with the skin, the eyes or clothing.
Consult a doctor immediately if brake fluid has been swallowed.
Rinse the affected area with plenty of water in the event of contact with the skin.
Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact
with the eyes.
If brake fluid spills on to your clothing, change the clothing.
Note
Environmental hazardHazardous substances cause environmental damage.
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.

Table of Contents

Other manuals for KTM 300 EXC TPI 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 300 EXC TPI 2019 and is the answer not in the manual?

KTM 300 EXC TPI 2019 Specifications

General IconGeneral
Displacement293.2 cm³
Bore x Stroke72 mm x 72 mm
StarterElectric starter
Transmission6-speed
CoolingLiquid cooled
Rear SuspensionWP XPLOR PDS shock absorber
Seat Height960 mm
Ground Clearance370 mm
Fuel Tank Capacity9.5 liters
Engine Type2-stroke
Fuel SystemTransfer Port Injection (TPI)
FrameCentral double-cradle type 25CrMo4 steel
Front SuspensionWP Xplor 48
Front BrakeDisc brake
Rear BrakeDisc brake 220 mm

Related product manuals