KTM 300 EXC TPI 2019 Repair Manual

SHOCK ABSORBER, SWINGARM 9
91
B04457-10
–
Place special tool
A
underneath and press out heim joint
3
using special tool
B
.
Pressing tool (T1207S) ( p. 373)
9.19 Installing the heim joint
B04459-10
–
Position new heim joint
1
and the special tool in the bench
vise.
Guideline
Use soft jaws.
Pressing tool (T1206) ( p. 373)
– Press the heim joint all the way in.
B04456-10
– Press the heim joint against the lock ring using the special
tool.
Pressing tool (T1207S) ( p. 373)
–
Mount second lock ring
2
.
B04458-10
–
Position both collar bushings
3
and press in.
9.20 Assembling seal ring retainer
B04496-10
–
Mount dust boot
1
with the special tool.
Mounting sleeve (T1204) ( p. 372)
– Grease the sealing lip of the dust boot.
Lubricant (T625) ( p. 360)

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm