KTM 300 EXC TPI 2019 Repair Manual

STORAGE 28
325
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because
the engine will not warm up sufficiently, the water
vapor produced during combustion will condense, caus-
ing engine parts and the exhaust system to rust.
28.2 Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 12)
– Install the battery. ( p. 162)
– Perform checks and maintenance measures when preparing for
use.
– Make a test ride.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm