KTM 300 EXC TPI 2019 Repair Manual

18 ENGINE
214
18.4.19 Removing the shift shaft
D04469-10
–
Push sliding plate
1
away from shift drum locating unit
2
.
Remove shift shaft
3
with washer.
18.4.20 Removing the shift drum locating unit
D04470-10
–
Remove screw
1
.
–
Push locking lever
2
away from shift drum locating unit
3
and take off the shift drum locating unit.
– Relieve tension from the locking lever.
18.4.21 Removing the locking lever
D04471-10
–
Remove screw
1
with the washer.
–
Take off locking lever
2
with the sleeve and spring.
18.4.22 Removing the rotor
D04474-10
–
Hold the rotor with special tool
1
.
Holding wrench (55429012000) ( p. 366)
–
Remove nut
2
with the washer.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm