KTM 300 EXC TPI 2019 Repair Manual

14 WHEELS
144
D00199-10
–
Press out bearing
5
using a suitable tool.
–
Press in new bearing
5
all the way using a suitable tool.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
D00198-10
–
Clean, grease, and mount spacing tube
4
.
Long-life grease ( p. 360)
–
Press in new bearing
3
all the way using a suitable tool.
Info
Only press the bearing in via the outer ring otherwise
the bearing will be damaged when it is pressed in.
D00196-10
–
Grease new shaft seal rings
2
and
1
and press in until they
are flush.
Finishing work
– Install the front wheel. ( p. 142)
14.8 Rear wheel
14.8.1 Removing the rear wheel
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 12)

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm