KTM 300 EXC TPI 2019 Repair Manual

18 ENGINE
250
D04546-10
–
Check the gear teeth of rotor
1
for damage and wear.
» If there is damage or wear:
– Change the rotor.
–
Check the gear teeth and bearing of the Bendix
2
for smooth operation, damage, and wear.
» If damaged or worn, or if the Bendix does not move easily:
– Change the Bendix.
–
Check the gear mesh of starter motor
3
for damage and wear.
» If there is damage or wear:
– Change the starter motor.
– Connect the negative cable of a 12-volt power supply to the housing of the starter motor. Connect the positive
cable of the power supply briefly with the connector of the starter motor.
» If the starter motor does not turn when the circuit is closed:
– Change the starter motor.
18.6 Engine assembly
18.6.1 Installing the crankshaft
B04429-11
–
Mount O-ring
1
.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm