EasyManuals Logo

KTM 300 EXC TPI 2019 Repair Manual

KTM 300 EXC TPI 2019
387 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
MOTORCYCLE 5
13
Info
If the engine is warm, the cold start button must be
deactivated.
400733-01
Press the electric starter button or push the kick starter
robustly through its full range.
Info
Do not open the throttle.
Press the electric starter button for a maximum of
5 seconds. Wait for 30 seconds before a further
attempt at starting.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-ion
battery and thereby increase the starting power.
During the starting process, the malfunction indicator
lamp lights up.
5.4 Starting the motorcycle to check the function
Danger
Danger of poisoningExhaust gases are toxic and inhaling them may result in unconsciousness and death.
Always make sure there is sufficient ventilation when running the engine.
Use an effective exhaust extraction system when starting or running the engine in an enclosed space.
Shift gear to neutral.
400733-01
Press the electric starter button or push the kick starter
robustly through its full range.
Info
Press the electric starter button for a maximum of 5
seconds. Wait for 30 seconds before a further attempt
at starting.
At temperatures below 15 °C (60 °F), several attempts
at starting may be necessary to warm-up the lithium-ion
battery and thereby increase the starting power.
During the starting process, the malfunction indicator
lamp lights up.
Do not open the throttle.

Table of Contents

Other manuals for KTM 300 EXC TPI 2019

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 300 EXC TPI 2019 and is the answer not in the manual?

KTM 300 EXC TPI 2019 Specifications

General IconGeneral
Displacement293.2 cm³
Bore x Stroke72 mm x 72 mm
StarterElectric starter
Transmission6-speed
CoolingLiquid cooled
Rear SuspensionWP XPLOR PDS shock absorber
Seat Height960 mm
Ground Clearance370 mm
Fuel Tank Capacity9.5 liters
Engine Type2-stroke
Fuel SystemTransfer Port Injection (TPI)
FrameCentral double-cradle type 25CrMo4 steel
Front SuspensionWP Xplor 48
Front BrakeDisc brake
Rear BrakeDisc brake 220 mm

Related product manuals