KTM 300 EXC TPI 2019 Repair Manual

WHEELS 14
147
D00220-10
Main work
(All standard EXC/XC-W models)
–
Remove screws
1
. Remove the brake disc.
– Clean the contact surface of the brake disc.
– Position the new brake disc with the label facing outward.
–
Mount and tighten screws
1
.
Guideline
Screw, rear
brake disc
M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
D02133-10
(All Six Days models)
–
Remove screws
1
. Remove the brake disc.
– Clean the contact surface of the brake disc.
– Position the new brake disc with the label facing outward.
–
Mount and tighten screws
1
.
Guideline
Screw, rear
brake disc
M6 14 Nm (10.3 lbf ft)
Loctite
®
243™
Finishing work
– Install the rear wheel. ( p. 145)
– Remove the motorcycle from the lift stand. ( p. 12)
14.8.4 Changing the rear wheel bearing
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 12)
– Remove the rear wheel. ( p. 144)
D00209-10
Main work
–
Remove shaft seal ring
1
.
–
Remove lock ring
2
.
D00211-10
–
Remove shaft seal ring
3
.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm