KTM 300 EXC TPI 2019 Repair Manual

17 LIGHTING SYSTEM, INSTRUMENTS
188
D00067-10
–
Sever black/brown cable
2
.
– Insulate both cable ends.
Finishing work
– Install the headlight mask with the headlight. ( p. 135)
– Check the headlight setting. ( p. 183)
17.12 Setting the wheel circumference
Condition
The motorcycle is stationary.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 135)
– Activate additional functions. ( p. 187)
400315-01
Main work
– Repeatedly press the button briefly until H appears at the
bottom right of the display.
– Press the button for 2–3 seconds.
– When WS flashes, press the button briefly.
Info
The wheel circumference is displayed in millimeters.
Enlarging the wheel circumference
– Press the button .
Reducing the wheel circumference
– Press the button .
Info
If no button is pressed for 20 seconds, or if no
impulse comes from the wheel speed sensor, the
settings are automatically saved and the Setup
menu is closed.
17.13 Viewing the lap time
Info
This function can only be opened if lap times have actually been timed.
Condition
The motorcycle is stationary.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm