KTM 300 EXC TPI 2019 Repair Manual

LUBRICATION SYSTEM 22
297
22.5 Opening 2-stroke oil tank cap
E00861-10
–
Fold loop
1
upward.
– Turn the 2-stroke oil tank cap counterclockwise and pull it up.
22.6 Adding 2-stroke oil
Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
– As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
– At the next opportunity add 2-stroke oil before you refuel.
– Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
– Open 2-stroke oil tank cap. ( p. 297)
M01516-10
–
Fill the 2-stroke oil tank up to the lower edge
A
of the filler
neck.
2-stroke oil tank con-
tent approx.
0.7 l (0.7 qt.) Engine oil, 2-stroke
( p. 358)
– Close 2-stroke oil tank cap. ( p. 297)
22.7 Closing 2-stroke oil tank cap
E00861-11
– Put the 2-stroke oil tank cap on and turn it clockwise.
–
Fold loop
1
down.
The 2-stroke oil tank cap engages.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm