KTM 300 EXC TPI 2019 Repair Manual

ENGINE 18
251
D04496-11
– Position the right section of the engine case in the engine work
stand.
Engine work stand (61229001000) ( p. 370)
Holder and fitting for work stand (55429002000)
( p. 365)
– Warm up the crankshaft bearing.
Guideline
100 °C (212 °F)
–
Slide crankshaft
2
all the way into the bearing seat of the
right section of the engine case.
18.6.2 Installing the transmission shafts
D04495-11
– Oil all bearings.
Engine oil (15W/50) ( p. 358)
–
Assemble the two transmission shafts
1
and slide them into
the bearing seats together.
D04494-11
–
Mount lock ring
2
.
18.6.3 Installing the shift forks
B04441-10
–
Arrange shift forks
1
,
2
, and
3
as shown.

KTM 300 EXC TPI 2019 Specifications

General

Displacement	293.2 cm³
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel Tank Capacity	9.5 liters
Engine Type	2-stroke
Fuel System	Transfer Port Injection (TPI)
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP Xplor 48
Front Brake	Disc brake
Rear Brake	Disc brake 220 mm