Suzuki VZR1800 2008 User Manual

3-46 ENGINE
PRIMARY DRIVE GEAR BEARING
• Inspect the needle bearing for abnormal noise, wear and
damage. If necessary, replace it with a new one.
GEARSHIFT COVER
DISASSEMBLY
• Remove the gearshift shaft oil seal 1.
• Remove the bearing with the special tools.
% 09921-20210: Bearing remover
09930-30104: Sliding shaft
REASSEMBLY
• Install the bearing 1 and oil seal 2 with the special tool.
% 09913-70210: Bearing installer set (22 mm)
• Apply SUZUKI SUPER GREASE “A” to the oil seal lip.
) 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
"
Use a new oil seal to prevent oil leakage.

Suzuki VZR1800 2008 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, V-twin
Front Tire	130/70R18M/C 63H
Overall Length	2485mm (97.8 inches)
Overall Height	1185 mm
Ground Clearance	140 mm (5.5 in)
Seat Height	705 mm
Curb Weight	347 kg