Suzuki VZR1800 2008 User Manual

8-10 COOLING AND LUBRICATION SYSTEM
If the resistance is noted to show infinity or too much different
resistance value, replace the ECT sensor with a new one.
#
INSTALLATION
• Install the new sealing washer 1.
• Tighten the ECT sensor 2 to the specified torque.
$ ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lb-ft)
#
• Install the rear intake pipe and thermostat assembly.
(!3-112)
• Install the air cleaner chamber and throttle body. (!6-21)
• Pour engine coolant. (!2-21)
* Take special care when handling the ECT sensor. It
may cause damage if it gets a sharp impact.
* Do not contact the ECT sensor and the column ther-
mometer with a pan.
* Replace the removed sealing washer 1 with a new
one.
* Take special care when handling the ECT sensor. It
may cause damage if it gets a sharp impact.

Suzuki VZR1800 2008 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, V-twin
Front Tire	130/70R18M/C 63H
Overall Length	2485mm (97.8 inches)
Overall Height	1185 mm
Ground Clearance	140 mm (5.5 in)
Seat Height	705 mm
Curb Weight	347 kg