Suzuki VZR1800 2008 User Manual

ISC VALVE RESET (For VZR1800K8/ZK8)
When removing or replacing the throttle body assembly, reset
the ISC valve learned value in the following procedures:
1) Turn the ignition switch to the ON position.
2) Set up the SDS tools.
! A 09904-41010: SDS set
99565-01010-014: CD-ROM Ver. 14
3) Click “Active control”.
4) Click “ISC learned value reset” 1.
5) Click “Reset” button 2 to clear the ISC learned value.
NOTE:
The learned value of the ISC valve is set at RESET position.
6) Close the SDS tool.
7) Turn the ignition switch to the OFF position.
NOTE:
The ISC valve opening initialization is automatically started after
the ignition switch is turned OFF.
Yes
No
14- VZR1800 ('08-MODEL)18

Suzuki VZR1800 2008 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, V-twin
Front Tire	130/70R18M/C 63H
Overall Length	2485mm (97.8 inches)
Overall Height	1185 mm
Ground Clearance	140 mm (5.5 in)
Seat Height	705 mm
Curb Weight	347 kg