Suzuki VZR1800 2008 User Manual

ENGINE 3-41
CYLINDER
CYLINDER DISTORTION
• Check the gasketed surface of the cylinder for distortion with
a straightedge and thickness gauge, taking a clearance read-
ing at several places as indicated.
• If the largest reading at any position of the straightedge
exceeds the limit, replace the cylinder.
$ Cylinder distortion:
Service Limit: 0.05 mm (0.002 in)
% 09900-20803: Thickness gauge
CYLINDER BORE
• Inspect the cylinder wall for any scratches, nicks or other
damage.
$ Cylinder bore:
Standard: 112.000 – 112.015 mm (4.4094 – 4.4100 in)
CAM CHAIN GUIDE
• Inspect the cam chain guide for damage. If any damage are
found, replace the cam chain guide with a new one.

Suzuki VZR1800 2008 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, V-twin
Front Tire	130/70R18M/C 63H
Overall Length	2485mm (97.8 inches)
Overall Height	1185 mm
Ground Clearance	140 mm (5.5 in)
Seat Height	705 mm
Curb Weight	347 kg