January 2016
4-108
WorkCentre WorkCentre 4150/4250/4260WorkCentre 4150/4250/42604150/
REP 7.2
Repairs and Adjustments
REP 7.2 Tray 2, 3 and 4 Paper Transport Sensors and
Transport Roll Gear
Parts List on PL 7.25 and PL 8.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
1. Power off the machine. Disconnect the power cord.
2. If necessary, remove the finisher, REP 12.1.
WARNING
Mandatory safety warning. This procedure must be performed by two people. The mod-
ule is heavy.
NOTE: The weight of the machine is 45Kg (99lb). The weight of each additional tray is 11.85Kg
(26lb).
3. Remove the machine from the stack of trays.
To Next Page
Loading...
Need help?
General
