Yamaha ttr230 User Manual

SPEC
SPECIFICATIONS
GENERAL SPECIFICATIONS
2-1
GENERAL SPECIFICATIONS
Model name: TTR230T
YAMALUBE4, SAE10W30 or SAE20W40
(for USA/ CAN)
SAE10W30 or SAE10W40 or SAE20W40
or SAE20W50 (for AUS)
1.0 L
1.1 L
1.3 L
Oil type:
Engine oil
Periodic oil change
With filter replacement
Total capacity
Wet crankcase
Lubrication system:
Type
Air cooled, 4-stroke, SOHC
Single cylinder, front inclined
223cm
3
70x58mm
9,5:1
1.200 kPa (12kg/cm² at 1000 rpm)
Electric start
Engine:
Type
Cylinder arrangement
Displacement
Diameter vs. stroke
Compression rate
Compression pressure (STD)
Starting system
110 Kg
116 Kg
Basic weight:
Basic weight
With oil and full fuel tank
Minimum turning radius: 2,100 mm
Model code:
Dimensions:
Total length
Total width
Total height
Seat height
Wheel base:
Minimum height from ground
TT-R230
1C61 USA
1C63 CDN
1C64 AUS
2,065 mm (81.30 in)
800 mm (31.50 in)
1,180 mm (46.46 in)
870 mm (34.25 in)
1,385 mm (54.53)
295 mm (11.61)

Yamaha ttr230 Specifications

General

Engine Type	223cc air-cooled SOHC 4-stroke; 2 valves
Bore x Stroke	70.0mm x 58.0mm
Compression Ratio	9.5:1
Ignition	CDI
Transmission	Constant-mesh 6-speed; multiplate wet clutch
Final Drive	Chain
Rear Suspension	Single shock; 8.7-in travel
Front Tire	80/100-21
Rear Tire	100/100-18
Length	81.3 in
Width	31.5 in
Seat Height	34.3 in
Wheelbase	54.5 in
Ground Clearance	11.6 in
Front Suspension	Telescopic fork
Rear Brake	Drum