INSP
ADJUS
3-38
TIRE INSPECTION
TIRE INSPECTION
1. Measure:
• Tire pressure
Out of specification => Adjust.
The pressure should be checked and
corrected when the tire temperature equals
to the room temperature. The pressure
should be compatible with the total weight
of load, driver, passenger, and accessories
(fairing, side bags, etc., when approved for
this model) and the speed of the vehicle.
The appropriate load is important for
driving, braking and other characteristics
of performance and safety of your
motorcycle. Do not carry objects not packed
properly that may be displaced. Fasten your
heavier load firmly, close to the center of
the motorcycle, distributing the weight
uniformly on both sides. Adjust the
suspension according to the load and check
the conditions and pressure of the tires.
NEVER OVERLOAD YOUR MOTORCYCLE.
Make sure that the total weight of load,
driver, passenger, and accessories (fairing,
side bags, etc., when approved for this
model) does not exceed the maximum load
for the motorcycle. Riding an overloaded
motorcycle may result in tire damage,
accidents and injuries.
CAUTION:
Off-road riding:
Front:
15 psi (100 kPa) (1.00 kgf/cm
2
)
Rear:
15 psi (100 kPa) (1.00 kgf/cm
2
)
Maximum load*:
90.0 kg (198 lb)
* total weight with driver, load and
accessories
To Next Page
Loading...
Need help?
General
