Yamaha ttr230 User Manual

SPEC
conical top and bottom
240 mm
614.2 mm
(k1) 3.43 N/mm (0.34 Kg/m)
(k2) 4.80 N/mm (0.48 Kg/m)
161 mm
352 cm
3
suspension oil 10W or equivalent
81 mm
210 mm
204 mm
83.40 N/mm
2.0 MPa
Spoked
1.60 x 21
Aluminum
<2.0 mm>
<2.0 mm>
Spoked
1.85 x 18
Aluminum
<2.0 mm>
<2.0 mm>
520 V2/DAIDO
106
45~60 mm
MAINTENANCE SPECIFICATIONS
FRAME
2-11
Steering system:
Roller bearing type
Front suspension:
Suspension travel
Free suspension spring length
Spring force/travel
Oil level
Oil capacity
Oil type
Rear suspension:
Shock absorber travel
Free spring length
Installed length
Spring force/travel
Gas pressure
Front wheel:
Type
Wheel ring dimensions
Ring material
<Ring warping limit>
Vertical
Side
Rear wheel:
Type
Wheel ring dimensions
Ring material
<Ring warping limit>
Vertical
Side
Transmission chain:
Type/Manufacturer
# of links
Clearance

Yamaha ttr230 Specifications

General

Engine Type	223cc air-cooled SOHC 4-stroke; 2 valves
Bore x Stroke	70.0mm x 58.0mm
Compression Ratio	9.5:1
Ignition	CDI
Transmission	Constant-mesh 6-speed; multiplate wet clutch
Final Drive	Chain
Rear Suspension	Single shock; 8.7-in travel
Front Tire	80/100-21
Rear Tire	100/100-18
Length	81.3 in
Width	31.5 in
Seat Height	34.3 in
Wheelbase	54.5 in
Ground Clearance	11.6 in
Front Suspension	Telescopic fork
Rear Brake	Drum