Yamaha ttr230 User Manual

INFO
GEN
GENERAL INFORMATION
MOTORCYCLE IDENTIFICATION
The serial number of the frame 1 is engraved
on the tube of the steering column.
MOTORCYCLE IDENTIFICATION
FRAME NUMBER
1-1
MODEL IDENTIFICATION
The model ID label 1 is stuck on the frame.
This information will be required for
replacement part orders.
The vehicle’s ID number is used to identify
the motorcycle, when registering and
licensing it with the local traffic authority.
NOTE:

Yamaha ttr230 Specifications

General

Engine Type	223cc air-cooled SOHC 4-stroke; 2 valves
Bore x Stroke	70.0mm x 58.0mm
Compression Ratio	9.5:1
Ignition	CDI
Transmission	Constant-mesh 6-speed; multiplate wet clutch
Final Drive	Chain
Rear Suspension	Single shock; 8.7-in travel
Front Tire	80/100-21
Rear Tire	100/100-18
Length	81.3 in
Width	31.5 in
Seat Height	34.3 in
Wheelbase	54.5 in
Ground Clearance	11.6 in
Front Suspension	Telescopic fork
Rear Brake	Drum