Commands listed in alphabetical order
Examples
ACQUIRE:FASTA
CQ:PALETTE TEMPerature
sets the acquisition fast acquisition
palette to Temperature.
ACQUIRE:FAST
ACQ:PALETTE
? might return :ACQUIRE:FASTACQ: PALETTE
TEMPERATURE
.
ACQuire:FASTAcq:STATE
Sets or queries the state of fast acquisition mode.
Group
Acquisition
Syntax
ACQuire:FASTAcq:STATE {<NR1>|OFF|ON}
ACQuire:FASTAcq:STATE?
Arguments
<NR1> = 0 disables FASTAcq; any other value turns this feature on.
OFF disables the FASTAcq feature.
ON enables the FASTAcq feature.
Examples
ACQUIRE:FASTACQ:STATE ON turns on fast acquisition mode.
ACQUIRE:FASTACQ:STATE? might return :ACQUIRE:FASTACQ:STATE 0
indicating that fast acquisition mode is off.
ACQuire:MAXSamplerate? (Query Only)
This query returns the maximum real-time sample rate.
Group
Acquisition
Syntax
ACQuire:MAXSamplerate?
Examples
ACQUIRE:MAXSAMPLERATE? might return :ACQUIRE:MAXSAM PLERATE
6.25E9
.
ACQuire:MODe
This command sets or queries the selected acquisition mode o f the instrument.
2-94 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
