Tektronix MSO58 User Manual

Commands listed in alphabetical order
Conditions
Requires the SR
-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:COMMAND:ADDRess:
VALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:COMMAND:ADDRess:
VALue?
Arguments
<QString> is the address value.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:COMMAND:ADDRESS:VALUE
"X1000"
sets the value to X1000.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:COMMAND:ADDRESS:VALUE?
might return "XXXXX", indicating that the value is XXXXX.
SEARCH:SEARCH<x>:TRIGger:A:BUS:MIL1553B:COMMAND:COUNt
This command sets or q
ueries the value of the command word "word count" field
for a MIL-STD-1553 bus to search on. The search number is specified by x. The
search condition must be set to COMMAND.
Conditions
Requires the SR-AERO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:COMMAND:COUNt
<QString>
SEARCH:SEARCH<x>:TRIGger:A :BUS:MIL1553B:COMMAND:COUNt?
Arguments
<QString> is the word count value.
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:COMMAND:COUNT "X1000"
sets the value to X1000.
SEARCH:SEARCH1:TRIGGER:A:B US:MIL1553B:COMMAND:COUNT? might
return "XXXXX", indicating that the value is XXXXX.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-683

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English