Tektronix MSO58 User Manual

Commands listed in alphabetical order
Arguments
<QString> with
in the range 0000000 to 1111111 (00 hex to 7F hex).
Examples
TRIGGER:A:BUS:B1:USB:ADDRE SS:HIVALUE "0001000" sets the upper limit
to binary 0001000 (08 hex).
TRIGGER:A:BUS:B1:USB:ADDRE SS:HIVALUE? might return
:TRIGGER:A:BUS:B1:USB:ADDR ESS:HIVALUE "1111111", which indicates
that the upper limit is 1111111 (7F hex).
TRIGger:{A|B}:BUS:B<x>:USB:ADDRess:VALue
This command specifies the binary address string to be used for USB trigger.
The trigger condition must be set to TOKEN. The bus number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Trigger
Syntax
TRIGger:{A|B}:BUS:B<x>:USB :ADDRess:VALue <QString>
TRIGger:{A|B}:BUS:B<x>:USB :ADDRess:VALue?
Related Commands
TRIGger:{A|B}:BUS:B<x>:USB:CONDition
Arguments
<QString> within the range 0000000 to 1111111 (00 hex to 7F hex).
Examples
TRIGGER:A:BUS:B1:USB:ADDRE SS:VALUE "0001000" sets the binary
address to 0001000 (08 hex).
TRIGGER:A:BUS:B1:USB:ADDRE SS:VALUE? might return
:TRIGGER:A:BUS:B1:USB:ADDR ESS:VALUE "1000000",which
indicates that the binary address is 100000 (40 hex).
TRIGger:{A|B}:BUS:B<x>:USB:CONDition
This command specifies the trigger condition for the USB trigger. The bus
number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-835

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English