Tektronix MSO58 User Manual

Commands listed in alphabetical order
SEARCH:SEARCH
1:TRIGger:A:LOGIc:LEVel:REF1 ?
might return
:SEARCH:SEARCH1:TRIGGER:A: LOGIC:LEVEL:REF1 0.0E+0 indicating
the level is set to 0.0 V.
SEARCH:SEAR
CH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>
This command sets or queries the conditions used for generating an A logic
pattern, with respect to the de fi ned input pattern, and identifies the time that the
selected p
attern may be true and still generate the trigger. The search number is
specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:CH<x> {H|L|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:CH<x>?
Arguments
H specifies triggering when the pattern is high.
L specifies triggering when the pattern is low.
X specifies triggering when the pattern is high or low.
Examples
SEARCH:SEARCH1:TRIGger:A:L OGIc:LOGICPattern:CH2 H sets the
channel 2 pattern to a high.
SEARCH:SEARCH1:TRIGger:A:L OGIc:LOGICPattern:CH2? might return
:SEARCH:SEARCH1:TRIGGER:A: LOGIC:LOGICPATTERN:CH2 X indicating
channel 2 is a don’t care.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:LOGICPattern:CH<x>_D<x>
This command sets or queries the conditions used for generating an A logic
pattern, with respect to the de fi ned input pattern, and identifies the time that the
selected pattern may be true and still generate the trigger. The search number is
specified by <x>.
Group
Search and Mark
Synt
ax
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:CH<x>_D<x>
{H|L|X}
SEARCH:SEARCH<x>:TRIGger:A :LOGIc:LOGICPattern:CH<x>_D<x>?
MSO54, MSO56, MSO58, MSO58LP Programmer 2-719

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English