Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
MEASUrement:M
EAS1:CLOCKRecovery:EXPLICITC LOCKMODe EDGE
sets
the c lock mode to edge.
MEASUrement:
MEAS1:CLOCKRecovery:EXPLIC ITCLOCKMODe?
might return
:MEASUREMENT:MEAS1:CLOCKRE COVERY:EXPLICITCLOCKMODE EDGE
indicating the explicit clock mode is edge.
MEASUremen
t:MEAS<x>:CLOCKRecovery:GLOBal
This command sets or queries the clock recovery settings global flag for t he
measurement. Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:CLOCKR ecovery:GLOBal {OFF|ON|0|1}
MEASUrement:MEAS<x>:CLOCKR ecovery:GLOBal?
Arguments
OFF clock recovery settings are changed independently for each individual
measurement.
ON applies global clock recovery settings to all the measurements' clock recovery
settings.
0 clock recovery settings are changed independently for each individual
measurement.
1 applies global clock recovery settings to all the measurements' clock recovery
settings.
Examples
MEASUrement:MEAS1:CLOCKRec overy:GLOBal 1 applies global clock
recovery settings to all the measurem
ents' clock recovery settings.
MEASUrement:MEAS1:CLOCKRec overy:GLOBal? might return
:MEASUREMENT:MEAS1:CLOCKRE COVER
Y:GLOBAL 0
indicating clock recovery
settings are changed independently for each individual measurement.
MEASUrement:MEAS<x>:CLOCKRecovery:JTFBandwidth
This command sets or queries the JTF b andwidth used when PLL clock recovery
is used for the measurement. Measuremen ts are specified by x.
Group
Measurement
MSO54, MSO56, MSO58, MSO58LP Programmer 2-435

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English