To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:M

EAS1:SSC:NOMinalfreq:SELECTI ONtype?

might

return

:MEASUREMENT:MEAS1:SSC:NOMI NALFREQ:SELECTIONTYPE AUT O

indicating the auto-detection type is selected.

MEASUrement

:MEAS<x>:TOEdge

This command sets or queries the 'to edge' type for the measurement. The

measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:TOEdge

{SAMEas|OPPositeas|RISe|FA LL|BOTH}

MEASUrement:MEAS<x>:TOEdge ?

Arguments

FALL speciﬁes the falling edge of the waveform.

RISE speciﬁes the rising edge of the waveform.

BOTH speciﬁes both a rising and falling edge of the waveform.

SAMEas speciﬁes that both edges of the waveform are the same.

OPPositeas speciﬁes that the edges of the waveform are not the same.

Examples

MEASUrement:MEAS1:TOEdge FALL speciﬁes the to edge is the falling edge

of the waveform.

MEASUrement:MEAS1:TOEdge? might return : MEASUREMENT:MEAS1:TOEDGE

SAMEAS

indicating that both edges of the waveform are the same.

MEASUrement:MEAS<x>:TOEDGESEARCHDIRect

This command sets or queries the to edge search direction for the measure ment.

The measure ment number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:TOEDGE SEARCHDIRect {FORWard|BACKWa rd}

MEASUrement:MEAS<x>:TOEDGE SEARCHDIRect?

MSO54, MSO56, MSO58, MSO58LP Programmer 2-487

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58