Tektronix MSO58 User Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:LIN:DATa:VALue
This command sets or queries the data string used for a LIN bus search. The
search number is spe cified by <x>. The search condition must be DATA or
IDANDDATA.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:DATa:VALue <QSt ring>
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:DATa:VALue?
Arguments
<QString> specifies the data value.
Examples
SEARCH:SEARCH2:TRIGger:A: BUS:LIN:DATa:VALue 1010 sets the data
value to XXXXXX1010.
SEARCH:SEARCH1:TRIGger:A: BUS:LIN:DATa:VALue? might return
:SEARCH:SEARCH1:TRIGGER:A :BUS:LIN:DATA:VALUE "XXXX XXXXXX",
indicating that the data value is a don’t care.
SEARCH:SEARCH<x>:TRIGger:A:BUS:LIN:ERRTYPE
This command sets or queries the error type for a LIN bus search. The search
number is specified by <x>. The search condition must be set to ERROR.
Conditions
Requires the SR-AUTO Triggering and Analysis application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:ERRTYPE
{CHecksum|PARity|SYNC}
SEARCH:SEARCH<x>:TRIGger: A:BUS:LIN:ERRTYPE?
Arguments
CHecksum spe cifies the error type is checksum.
PARity specifies the error type is parity.
SYNC specifies the error type is sync.
2-680 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English