Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:LOGIc:DELTatime
This command specifies the Logic search delta time value. The time value is used
as part of the Logic search condition to determine if the duration of a logic pattern
meets the spe
cified time constraints. The search number is s pecified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:DELTatime <NR3>
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:DELTatime?
Arguments
<NR3> is delta time value.
Examples
SEARCH:SEARCH1:TRIGger:A: LOGIc:DELTatime 1.5e-9 sets the delta
time to 1.5 ns.
SEARCH:SEARCH1:TRIGger:A: LOGIc:DELTatime? might return
:SEARCH:SEARCH1:TRIGGER:A :LOGIC:DELTATIME 1.0000E-9 indicating
the delta time is 1.0 ns.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:FUNCtion
This command sets or queries the logic operator for a patter
n or state trigger search
to determine where to place a mark. The search number is specified by <x>.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:FUNCtion {AND|NANd|N OR|OR}
SEARCH:SEARCH<x>:TRIGger: A:LOGIc:FUNCtion?
Arguments
AND places a mark if all conditions are true.
NANd places a mark if any of the conditions are false.
NOR places a mark if all conditions are false.
OR places a mark if any of the conditions are true.
Examples
SEARCH:SEARCH1:TRIGGER:A: LOGIC:FUNCTION AND sets the trigger a logic
functionforsearch1toAND.
2-716 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
