Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
MEASUrement:M
ATH2:REFLevels:PERCent:HYSTe resis 2.5
sets the
hysteresis to 2.5% of MAX
MEASUrement:
MATH2:REFLevels:PERCent:HY STeresis?
might return
:MEASUREMENT:MATH2:REFLEV ELS:PERCENT:HYSTERESIS 5. 0000
indicating the hysteresis is set to 5% of MAX.
MEASUremen
t:MATH<x>:REFLevels:PERCent:RISEHigh
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the high reference level of the rising edge
when the m
easurement ref level method is set to p ercent. The math number is
specified by x. The measurement number is specified by x.
Group
Measurement
Syntax
MEASUrement:MATH<x>:REFLe vels:PERCent:RISEHigh <NR 3>
MEASUrement:MATH<x>:REFLe vels:PERCent:RISEHigh?
Arguments
<NR3> is the percentage (where 100% is equal to TOP) used to calculate the high
reference level when the measurement's R ef level method is set to Percent.
Examples
MEASUrement:MATH2:REFLeve ls:PERCent:RISEHigh 95 sets the reference
level to 95% of TOP.
MEASUrement:MATH2:REFLeve ls:PERCent:RISEHigh? might return
:MEASUREMENT:MATH2:REFLEV ELS:PERCENT:RISEHIGH 90.0 000
indicating the reference level is set to 90% of TOP.
MEASUrement:MATH<x>:REFLevels:PERCent:RISELow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the low reference level of the rising edge
when the measurement ref level method is set to perc ent. The math number is
specified by x.
G
roup
M
easurement
Syntax
MEASUrement:MATH<x>:REFLe vels
:PERCent:RISELow <NR3>
MEASUrement:MATH<x>:REFLe vels:PERCent:RISELow?
2-418 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English