Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
LOCk {A LL|NONe
}
LOCk?
Related Commands
UNLock, TOUCHSCReen:STATe
Arguments
ALL disable
s all front panel controls.
NONe enables all front panel controls. This is equivalent to the UNLock ALL
command.
If the instrument is in the Remote With Lockout State ( RWLS), the LOCk
NONe command has no effect. For more information, see the ANSI/IEEE Std
488.1-1987 Standard Digital Interface for Programmable Instrumentation, section
2.8.3 on RL State Descriptions.
Examples
LOCK ALL locks the front panel controls.
LOCK? might return :LOCK NONE, indicating that the front panel controls are
enabled.
*LRN? (Query Only)
This query-only command returns the commands that list the instrument settings,
allowing you to record o r “learn” the current instrument settings. You can use
these commands to return the instrument to the state it was in when you made the
*LRN? query. This command is identical to the SET? command.
Group
Miscellaneous
Syntax
*LRN?
Related Commands
SET?
Examples
*LRN? might return the following response: *RST;:PARAMBATCHING
0;:HEADER 1;:VERBOSE 1;:ALIAS:STATE 0;:ACQUIRE:STATE
1;:ACQUIRE:NUMENV INFINITE;:FASTACQ :STATE 0;:FASTACQ:PALETT E
TEMPERATURE;:HORIZONTAL:S AMPLERATE:ANALYZEMODE:MINIMUM:VALUE
AUTOMATIC;:SELECT:CH1 1;:SELECT:CH2 0;:SELECT:CH3
0;:SELECT:CH4 0;:SELECT:CH5 0;:SELECT:CH6 0 ;:SELECT:CH7
0;:SELECT:CH8 0;:CH1:BANDWIDTH 250.0000E+6;:CH2:BANDWIDTH
500.0000E+6;:CH3:BANDWIDT H 500.0000E+6;:CH4:BANDWIDTH
500.0000E+6;:CH5:BANDWIDT H 500.0000E+6;:CH6:BANDWIDTH
500.0000E+6;:CH7:BANDWIDT H 120.0000E+6;:CH8:BANDWIDTH
2-362 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English