Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
MEASUrement:M
EAS<x>:BER <NR3>
MEASUrement:MEAS<x>:BER?
Arguments
<NR3> is BER value for the measurement.
Examples
MEASUrement:MEAS2:BER 10.0 sets the BER for the measurement to 10.0.
MEASUrement:MEAS2:BER? might return :MEASUREMENT:ME AS2:BER
12.0000
indicating the measurement BER is 12.0.
MEASUrement:MEAS<x>:BER:TARGETBER
This command sets or queries the target BER value for the measurement.
Measurements are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:BER:T ARGETB
ER <NR3>
MEASUrement:MEAS<x>:BER:T ARGETBER?
Arguments
<NR3> is the target BER value.
Examples
MEASUrement:MEAS1:BER:TAR GETBER 14.0 sets the target BER to 14.0.
MEASUrement:MEAS1:BER:TAR GETBER? might return
:MEASUREMENT:MEAS1:BER:TA RGETBER 12.0000 indicating the
target BER is 12.0.
MEASUrement:MEAS<x>:BIN
This command sets or queries the bin count for the measurement. Measurements
are specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:BIN <NR3>
MEASUrement:MEAS<x>:BIN?
Arguments
<NR3> is the bin count.
2-422 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English