Tektronix MSO58 User Manual

Commands listed in alphabetical order
SEARCH:SEARC
H<x>:TRIGger:A:BUS:USB:SPECIALType
This command sets or queries the USB search type for the specified USB bus
trigger search to determine where to place a mark. The search number is specified
by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
Syntax
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:SPECIALType
{ANY|ERROr|PING|PREamble|R ESERVed|SPLit}
SEARCH:SEARCH<x>:TRIGger:A :BUS:USB:SPECIALType?
Arguments
ANY specifies the PID value as Any (XX00).
ERROr specifiesthePIDvalueasERR(1100).
PING specifi esthePIDvalueasPING(0100).
PREamble specifi es the PID value as PRE (1100).
RESERVed specifies the PID value as Reserved (0000).
SPLit specifies the PID value as Split (1000).
Examples
SEARCH:SEARCH1:TRIGGER:A:B US:USB:SPECIALTYPE ERROR sets the PID
value for USB bus trigger search 1 to ERROR.
SEARCH:SEARCH1:TRIGGER:A:B US:USB:SPECIALTYPE? might return
:SEARCH:SEARCH1:TRIGGER:A: BUS:USB:SPECIALTYPE SPLIT, indicating
that the PID value for USB bus trigger search 1 is set to SPLIT.
SEARCH:SEARCH<x>:TRIGger:A:BUS:USB:SPLIT:ET:VALue
This command sets or queries the Endpoint Type value for the specified USB bus
trigger search on split token field to determine where to place a mark. The search
number is specified by <x>.
Conditions
Requires the SR-USB2 Serial Triggering and Analysis Application.
Group
Search and Mark
MSO54, MSO56, MSO58, MSO58LP Programmer 2-709

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English