To Next Page

To Previous Page

Commands listed in alphabetical order

MEASUrement:M

EAS1:REFLevels1:PERCent:TYPE ?

might return

:MEASUREMENT:MEAS1:REFLEVE LS1:PERCENT:TYPE TENNINET Y indicating

the reference levels percent type is 10%, 50% and 90% respective ly

MEASUrement

:MEAS<x>:REFMode

This command sets or queries the reference level mode for the measurement. The

measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFMod e {AUTO|MANual}

MEASUrement:MEAS<x>:REFMod e?

Arguments

AUTO sets the reference level for the measurement automatically.

MANual allows the user to set the reference level for the measurement.

Examples

MEASUrement:MEAS1:REFMode Manual allows the user to set the reference

level for the measurement.

MEASUrement:MEAS1:REFMode? might return

:MEASUREMENT:MEAS1:REFMODE AUTO indicating the reference levels for the

measurement are set automatically.

MEASUrement:MEAS<x>:REFVoltage

This

command sets or queries the reference voltage value for the measurement.

The measure ment number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFVol tage <NR3>

MEASUrement:MEAS<x>:REFVol tage?

Arguments

<NR3> is the reference voltage value for the selected conﬁguration.

Examples

MEASUrement:MEAS1:REFVolta ge 30.E-3 sets the reference voltage value

r the measurement to 30 mV.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-479

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58