Commands listed in alphabetical order
Group
Bus
Syntax
BUS:B<x>:LIN:IDFORmat {NOPARity|PAR ity}
BUS:B<x>:LIN:IDFORmat?
Arguments
NOPARity specifies an id format that includes parity.
PARity specifies an id forma t that separates parity.
Examples
BUS:B1:LIN:IDFORmat PARITY set the id format to parity.
BUS:B1:LIN:IDFORmat? might return :BUS:B1:LIN:IDFORMAT NOPARITY,
indicating the id format is set to no parity.
BUS:B<x>:LIN:POLarity
This command sets or queries the LIN source polarity for the specified bus. The
bus number is specified by x.
Conditions
Requires option SR-AUTO.
Group
Bus
Syntax
BUS:B<x>:LIN:POLarity {INVerted|NOR mal}
BUS:B<x>:LIN:POLarity?
Arguments
INVerted specifies inverted polarity.
NORmal specifies normal polarity.
Examples
BUS:B1:LIN:POLarity Inverted sets the polarity to inverted.
BUS:B1:LIN:POLarity? might return :BUS:B1:LIN:POLA RITY NORMAL,
indicating the bus polarity is set to normal.
BUS:B<x>:LIN:SAMPLEpoint
Specifies the LIN sample point, for the specified LIN bus. The bus is specified
by x.
Conditions
Requires option SR-AUTO.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-153
To Next Page
Loading...
Need help?
General
