Tektronix MSO58 User Manual

Commands listed in alphabetical order
Group
Display Contro
l
Syntax
DISplay:REFFFTView<x>:GRI Dlines {HORizontal|VERTic al|BOTH}
DISplay:REFFFTView<x>:GRI Dlines?
Arguments
HORizontal specifies horizontal grid lines.
VERTical specifies vertical grid lines.
BOTH specifies both horizontal and vertical grid lines.
Examples
DISplay:REFFFTView5:GRIDl ines hhorizontal specifies horizontal gird
lines.
DISplay:REFFFTView5:GRIDl ines? might return
:DISPLAY:REFFFTVIEW5:GRID LINES BOTH indicating that both vertical
and horizontal grid lines are diplayed
DISplay:REFFFTView<x>:REF:REF<x>:STATE
This command sets or queries the state of the specified reference waveform in
the specified waveview.
Group
Display Control
Syntax
DISplay:REFFFTView<x>:REF :REF<x>:STATE boolean
DISplay:REFFFTView<x>:REF :REF<x>:STATE?
Arguments
<NR1> = 0 disables the specified reference
; any other value turns this feature on.
OFF disables the display the specified reference.
ON enables the spec ified refere nce.
Examples
DISplay:REFFFTView5:REF:R EF5:STATE 0 turns display of the reference off.
DISplay:REFFFTView5:REF:R EF5:STATE? might return
:DISPLAY:REFFFTVIEW5:REF: REF5:ST
ATE 1
indicating the
reference is displayed.
DISplay:REFFFTView<x>:XAXIS:SCALE
This command sets or queries the x-axis scale setting for Ref FFT.
2-276 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English