Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
MEASUrement:C
H<x>:REFLevels:PERCent:RISEH igh <NR3>
MEASUrement:CH<x>:REFLeve ls:PERCent:RISEHigh?
Arguments
<NR3> is the percentage (where 100% is equal to TOP) used to calculate the high
reference level when the measurement's R ef level method is set to Percent.
Examples
MEASUREMENT:CH2:REFLEVELS :PERCENT:RISEHIGH 90.0000 sets the high
reference level for the rising edge to 90%.
MEASUREMENT:CH2:REFLEVELS :PERCENT:RISEHIGH? might return
:MEASUREMENT:CH2:REFLEVEL S:PERCENT:RISEHIGH 90.000 0 indicating
the h igh reference level for the rising edge is set to 90%.
MEASUrement:CH<x>:REFLevels:PERCent:RISELow
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the low reference level of the rising edge
when the measurement ref level method is set to percent. The channel numbe r
is specified by x.
Group
Measurement
Syntax
MEASUrement:CH<x>:REFLeve ls:PERCent:RISELow <NR3>
MEASUrement:CH<x>:REFLeve ls:PERCent:RISELow?
Arguments
<NR3> is the percentage (where 100% is equal to TOP) used to calculate the mid
reference level when the measurement's R ef level method is set to Percent.
Examples
MEASUREMENT:CH2:REFLEVELS :PERCENT:RISELOW 10.0000 sets the
referencelevelsfortherisingedgeto10%.
MEASUREMENT:CH2:REFLEVELS :PERCENT:RISELOW? might return
:MEASUREMENT:CH2:REFLEVEL S:PERCENT:RISELOW 10.0000 indicating the
reference levels for the rising edge is set to 10%.
MEASUrement:CH<x>:REFLevels:PERCent:RISEMid
This command sets or queries the percentage (where 100% is equal to TOP and
0% is equal to BASE) used to calculate the mid reference level of the rising edge
when the measurement ref level method is set to percent. The channel numbe r
is specified by x.
2-390 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English