Tektronix MSO58 User Manual

Commands listed in alphabetical order
Examples
DISplay:REFFF
TView5:CURSor:SPLITMODE SPLIT
specified that the c ursors
have different sources.
DISplay:REFF
FTView5:CURSor:SPLITMODE?
might return
:DISPLAY:REFFFTVIEW5:CURSO R:SPLITMODE SAME indicating both cursors
have the same source.
DISplay:RE
FFFTView<x>:CURSor:STATE
This command sets or queries the visible state of the cursor of the specified cursor
n the specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CURS or:STATE {OFF|ON|0|1}
DISplay:REFFFTView<x>:CURS or:STATE?
Arguments
<NR1> = 0 specifies the cursor is not visible; any other value displays the cursor.
OFF specifies the cursor is not visible.
ON displays the cursor.
Examples
DISplay:REFFFTView5:CURSor :STATE ON specifies the cursor is visible.
DISplay:REFFFTView5:CURSor :STATE? might return
:DISPLAY:REFFFTVIEW5:CURSO R:STATE 1 indicating the cursor is
visible.
DISplay:REFFFTView<x>:CURSor:VBArs:APOSition
This command sets or queries the horizontal cursor A position of the specified
cursor in the specified view.
Group
Cursor
Syntax
DISplay:REFFFTView<x>:CURS or:VBArs:APOSition <NR3>
DISplay:REFFFTView<x>:CURS or:VBArs:APOSition?
Arguments
<NR3> is the horizontal cursor A position of the specified cursor in the specified
view.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-271

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English