To Next Page

To Previous Page

Commands listed in alphabetical order

DISplay:REFFF

TView<x>:CURSor:FUNCtion?

Arguments

HBArs speciﬁes horizontal bar cursors, which measure in vertical units.

VBArs speciﬁes vertical bar cursors, which measure in horizontal units.

SCREEN speciﬁes both horizontal and vertical bar cursors, which measure in

horizontal and vertical units speciﬁed by the cursor sources. Use these cursors

to measure anywhere in the waveform display area.

WAVEform speciﬁes paired or split cursors i n YT display format for measuring

waveform amplitude and time. In XY and XYZ format, these cursors indicate the

amplitude positions of an XY pair (Ch1 vs Ch2 voltage, w here Ch1 is the X axis

and Ch2 is the Y axis) relative t

o the trigger.

Examples

DISplay:REFFFTView5:CURSor :FUNCtion screen sets the cursor function

to screen.

DISplay:REFFFTView5:CURSor :FUNCtion? might return

:DISPLAY:REFFFTVIEW5:CURSO R:FUNCTION WAVEFORM indicating the cursor

function is set to waveform.

DISplay:REFFFTView<x>:CURSor:HBArs:APOSition

This command sets or queries the vertical cursor A position of the speciﬁed cursor

in the speciﬁed view.

Group

Cursor

Syntax

DISplay:REFFFTView<x>:CURS or:HBArs:APOSition <NR3>

DISplay:REFFFTView<x>:CURS or:HBArs:APOSition?

Arguments

<NR3> is the vertical cursor A position of the speciﬁed cursor in the spec iﬁed view.

Examples

DISplay:REFFFTView5:CURSor :HBArs:APOSition -20 sets the A cursor

position to -20.

DISplay:REFFFTView5:CURSor :HBArs:APOSition? might

return

:DISPLAY:REFFFTVIEW5:CURSOR :HBARS:APOSITION

-14.4762489421361

indicating the A cursor position is -14.48 dBm.

MSO54, MSO56, MSO58, MSO58LP Programmer 2-265

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58