To Next Page

To Previous Page

Commands listed in alphabetical order

when the measur

ement's ref level m ethod is set to percent. The measurement

number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLe vels<x>:PERCent:RISEMid < NR3>

MEASUrement:MEAS<x>:REFLe vels<x>:PERCent:RISEMid?

Arguments

<NR3> the percentage (where 50% is equal to MID) used to calculate the mid

reference level when the measurement Ref level method is set to Percent.

Examples

MEASUrement:MEAS1:REFLeve ls1:PERCent:RISEMid 50.00 00 sets the

mid reference level of the rising edge is set to 50.0%.

MEASUrement:MEAS1:REFLeve ls1:PERCent:RISEMid? might return

:MEASUREMENT:MEAS1:REFLEV ELS1:PERCENT:RISEMID 50.0 000

indicating the mid reference level of the rising edge is set to 50.0%.

MEASUrement:MEAS<x>:REFLevels<x>:PERCent:TYPE

This command speciﬁes or queries the reference level per cent type for the

measurement. The measurement number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MEAS<x>:REFLe vels<x>:PERCent:TYPE {TEN Ninety|

TWENtyeighty| CUSTom}

MEASUrement:MEAS<x>:REFLe vels<x>:PERCent:TYPE?

Arguments

TENNinety sets the values for Low, Mid and High Ref to 10%, 50% and 90%

respectively.

TWENtyeighty sets the values for Low, Mid and High Ref are set to 20%, 50%

and 80% respectively.

CUSTom allows setting other reference level percents.

Examples

MEASUrement:MEAS1:REFLeve ls1:PERCent:TYPE TWENtyeight y sets the

reference levels percent to 20%, 50% and 80%.

2-478 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58