Tektronix MSO58 User Manual

Commands listed in alphabetical order
MEASUrement:
MEAS<x>:LABel
This command sets or queries the label for the measurement. As the label can
contain non 7-bit ASCII text, it is stored in Percent Encoding format. The
measurement
number is specified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:LABel <QString>
Arguments
<QString> is the measurement label.
Examples
MEASUrement:MEAS1:LABel “Delay” sets the label to Delay.
MEASUrement:MEAS1:LABel? might return :MEASUREMENT:MEAS1:LABE L
"Peak-to-Peak"
indicating that the measurement 1 label is Peak-to-peak.
MEASUrement:MEAS<x>:LOWREFVoltage
This command sets or queries the low reference voltage value for the 'time outside
level' measurement. Measurements are s pecified by x.
Group
Measurement
Syntax
MEASUrement:MEAS<x>:LOWRE FVoltage <NR3>
MEASUrement:MEAS<x>:LOWRE FVoltage?
Arguments
<NR3> is the low refer
ence volta ge value for the selected configuration.
Examples
MEASUrement:MEAS1:LOWREFV oltage -1.30 sets the low reference voltage
to -1.3 V.
MEASUrement:MEAS1:LOWREFV oltage? might return
:MEASUREMENT:MEAS1:LOWREF VOLTAGE -1.0000 indicating the
low ref voltage is -1.0 V.
MEASUrement:MEAS<x>:MEASRange:GLOBal
This command sets or queries the range settings global flag for the measurement.
Measurements are specified by x.
2-462 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English