Commands listed in alphabetical order
Group
Status and Erro
r
Syntax
*OPC
*OPC?
Related Commands
BUSY?, *WAI
Examples
*OPC generates the operation complete message in the SESR at the completion of
all pending OPC operations.
*OPC? might return 1 to indicate that all pending OPC operations are finished.
*OPT? (Query Only)
This query-only command returns a comma separated list of installed options as
an arbitrary ASCII string (no quotes) of the form:
<optionCode>:<optionDescription>,<optionCode>:<optionDescription>...
The last section of each entry (the text following the last hyphen) indicates the
license type.
If no options are found, NONE is returned.
Group
Status and Error
Syntax
*OPT?
Examples
*OPT? response (with each option listed o n a separate line for clarity):
5-BW-1000 – 1GHz,
5-DJA – Advanced Jitter and Eye Analysis– NODE .
PASSWord (No Query Form)
This command (no query form) enables the *PUD and NEWpass set commands.
Sending PASSWord without any arguments disables these same commands. Once
the password is successfully entered, the *PUD and NEWpass commands are
enabled u ntil the instrument is powered off, or until the FACtory command, the
PASSWord command with no arguments, or the *RST command is issued.
2-518 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
