To Next Page

To Previous Page

Commands listed in alphabetical order

Syntax

MEASUrement:L

OCKRJ

{<NR1>|OFF|ON}

MEASUrement:LOCKRJ?

Arguments

ON indicates that RJ locking is active.

OFF indicates that RJ locking is off.

<NR1> a 0 turns off RJ locking; any other value activates RJ locking.

Examples

MEASUREMENT:LOCKRJ ON activates RJ locking

MEASUrement:LOCKRJValue

This command sets or queries the RJ lock value.

Group

Measurement

Syntax

MEASUrement:LOCKRJValue <NR3>

MEASUrement:LOCKRJValue?

Arguments

<NR3> default value = 1e-12; minimum value = 1e-15; maximum value = 1.

Examples

MEASUREMENT:LOCKRJVALUE 1 sets the lock value to the maximum value of 1.

MEASUREMENT:LOCKRJVALUE? might return :MEASUREMEN T:LOCKRJVALUE

1.0000E-12

, indicating the lock value is set to the default value of 1 e-12.

MEASUrement:MATH<x>:REFLevels:ABSolute:FALLHigh

This command sets or queries the value used as the high reference level of the

falling edge when the measurement ref level method is set to absolute. The math

number is speciﬁed by x.

Group

Measurement

Syntax

MEASUrement:MATH<x>:REFLe vels:ABSolute:FALLHigh <N R3>

MEASUrement:MATH<x>:REFLe vels:ABSolute:FALLHigh?

Arguments

<NR3> is the high reference level, and is the zero percent level when

MEASUrement:IMMed:REFLevel:METHod is set to Absolute.

2-410 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 User Manual

Other manuals for Tektronix MSO58