Commands listed in alphabetical order
Group
Ethernet
Syntax
ETHERnet:NETWORKCONFig {AUTOmatic|MANu al}
ETHERnet:NETWORKCONFig?
Related Commands
ETHERnet:NAME,
ETHERnet:IPADDress,
ETHERnet:SUBNETMask,
ETHERnet:GATEWay:IPADDress ,
ETHERnet:DHCPbootp
Arguments
AUTOmatic specifies that the oscilloscope’s IP address, subnet mask and gateway
settings will be received from a DHCP server on the local network.
MANual speci fi es that the Ethernet settings will be configured
manually, u sing ETHERnet:IPADDress, ETHERnet:SUBNETMask,and
ETHERnet:GATEWay:IPADDress .
Examples
ETHERnet:NETWORKCONFig MANual specifies to configure the Ethernet
settings manually.
ETHERnet:NETWORKCONFig? might return AUTOMATIC, indicating the
settings are being configured automatically.
ETHERnet:PING (No Query F orm)
Sends a ping packet to the instrument gatewa y and sets the status accordingly.
Group
Ethernet
Syntax
ETHERnet:PING EXECute
Examples
ETHERNET:PING EXECute causes the oscilloscope to ping the gateway IP
address.
ETHERnet:PING:STATus? (Query Only)
Returns the results of sending the ETHERnet:PING commandtopingthegateway
IP address.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-327
To Next Page
Loading...
Need help?
General
