Commands listed in alphabetical order
Examples
DVM:MEASU:VAL
?
might return :DVM:MEASUREMENT: VALUE 430.7000E-3,
which represents the DVM value.
DVM:MODe
This command specifies (or queries) the mode to use for the D i gital Voltmeter.
Conditions
Requires DVM option.
Group
DVM
Syntax
DVM:MODe {ACRMS|ACDCRMS|DC|OFF}
DVM:MODe?
Arguments
ACRMS – displays the root-mean-square value of the acquired data, with the DC
component removed.
ACDCRMS – displays the RMS value of the acquired data.
DC – displays the DC value of the acquired data.
OFF
Examples
DVM:MODE DC sets the mode for the DVM to DC, which displays the DC value of
the acquired data.
DVM:MOD? might return ACRMS, which indicates the mode is currently set
to ACRMS.
DVM:SOUrce
This command sets (or queries) the source for the DVM.
Conditions
Requires DVM option.
Group
DVM
Syntax
DVM:SOUrce {CH<x>}
DVM:SOUrce?
Arguments
CH<x> specify which channel to use as the source for the DVM.
2-320 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
