Tektronix MSO58 User Manual

Commands listed in alphabetical order
Syntax
DISplay:VARpe
rsist <NR 3>
DISplay:VARpersist?
Related Commands
DISplay:PERSistence
Arguments
<NR3> indic
ates the persistence decay time and ranges from 0.5 to 100.
Examples
DISPLAY:VARPERSIST 5 sets the persistence decay time to 5.
DISPLAY:VARPERSIST? might return :DISPLA Y:VARPERSIST 3.0000E-01,
indicating that persistence decay time is currently set to 0.300.
DISplay:WAVEView<x>:BUS:B<x>:STATE
Sets or queries the state of the specified bus in the specified waveview.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
Group
Display Control
Syntax
DISplay:WAVEView<x>:BUS:B <x>:STATE {OFF|ON|0|1}
DISplay:WAVEView<x>:BUS:B <x>:STATE?
Arguments
0 turns specified bus off.
1 turns the specified bus on.
ON turns the specified bus on.
OFF turns specified bus off.
Examples
DISplay:WAVEView1:BUS:B1: STATE OFF turns specified bus off.
DISplay:WAVEView1:BUS:B1: STATE? might return
:DISPLAY:WAVEVIEW1:BUS:B1 :STATE 1 indicating the specified bus is on.
DISplay:WAVEView<x>:BUS:B<x>:VERTical:POSition
Sets or queries t he vertical position of the specified bus in the specified waveview.
NOTE.
WAVEView<x> is the specified waveview and must be WAVEView1 .
2-282 MSO54, MSO56, MSO58, MSO58LP Programmer

Tektronix MSO58 Specifications

General

Brand	Tektronix
Model	MSO58
Category	Test Equipment
Language	English