Tektronix MSO58 User Manual

Commands listed in alphabetical order
BUS:DELete (N
o Query Form)
This command deletes the specified bus.
Group
Bus
Syntax
BUS:DELete <QString>
Arguments
<QString> specifies the bus to delete and is of the form "B<NR1>", where
<NR1> is ≥1.
Examples
BUS:DELETE B1 deletes b us B1.
BUS:LIST? (Query Only)
This query returns a comma separated list of all currently defined buses.
Group
Bus
Syntax
BUS:LIST?
Returns
Returns all currently defined buses.
Examples
BUS:LIST? might return :BUS :LIST B1,B4 indicating the bus 1 and bus 4 are
defined.
BUSTABle:ADDNew (No Query Form)
Adds the specified bus table. Argument is of the form "TABLE<N R1>",where
<NR1> is ≥1).
Group
Bus
Syntax
BUSTABle:ADDNew <QString>
Arguments
<QString> is a quoted string that is the name o f the new bus table.
MSO54, MSO56, MSO58, MSO58LP Programmer 2-183

Tektronix MSO58 Specifications

General

Analog Channels	8
Sample Rate	6.25 GS/s
Operating Temperature	0 °C to +50 °C
Bandwidth	2 GHz
Digital Channels	16
Record Length	125 Mpoints
Display	15.6 inch touchscreen
Waveform Update Rate	>500, 000 waveforms/s
Vertical Resolution	12 bits
Input Impedance	1 MΩ ±1%, 13 pF ±2 pF
Maximum Input Voltage	300 V (DC + AC peak)
Probe Interface	TekVPI
Dimensions	14.4 in x 8.7 in x 6.0 in