Commands listed in alphabetical order
Examples
ACQUIRE:MODE E
NVELOPE
sets the acquisition m ode to display a waveform that
is an envelope of many individual waveform acquisitions.
ACQUIRE:MODE? might return :ACQuire:MODe AVERAGE, indicating that
the displayed waveform is the average of the specified number o f waveform
acquisitions.
ACQuire:NUMACq? (Query Only)
This query-only command returns the number of waveform acquisitions that have
occurred since the last time acquisitions were stopped.
Group
Acquisition
Syntax
ACQuire:NUMACq?
Related Commands
ACQuire:STATE
Examples
ACQUIRE:NUMACQ? might return :ACQUI RE:NUMACQ 350, indicating that 350
acquisitions have occurred since executing an ACQuire:STATE RUN command.
ACQuire:NUMAVg
This command sets o r queries the number of waveform acquisitions that make
up an averaged waveform. Ranges from 2 to 10240.
Group
Acquisition
Syntax
ACQuire:NUMAVg <NR1>
ACQuire:NUMAVg?
Related Commands
ACQuire:MODe
Arguments
<NR1> is the number of waveform acquisitions to average.
Examples
ACQUIRE:NUMAVG 10 specifies that 10 waveform averages will be performed
before exponential averaging starts.
ACQUIRE:NUMAVG? might return :ACQU IRE:NUMAVG 75, indicating that there
are 75 acquisitions specified for a veraging.
2-96 MSO54, MSO56, MSO58, MSO58LP Programmer
To Next Page
Loading...
Need help?
General
